March 20, 2019, 01:53:13 AM

Author Topic: FiTech ProCal Software and Documentation  (Read 17 times)

0 Members and 1 Guest are viewing this topic.

Wheelman

  • Administrator
  • Full Member
  • *****
  • Posts: 206
  • My Ride: 1981 Trans Am
  • Location: Etobicoke
FiTech ProCal Software and Documentation
« on: March 09, 2019, 03:02:25 PM »
This is the official FiTech EFI ProCal software, installation and user manual for your PC.
FiTech EFI ProCal Application

To install KLine driver on Windows 8 or Windows 10
https://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/

Installing the FiTech ProCal software onto Windows XP

Installing the K Line mode drivers

Using the FiTech PC Software

Tuning Guide
FiTech Handheld User Manual 20150415a

Definitions of all the Handheld Metrics
Fitech User Manual Basic 20150522

Basic overview of the most common setup questions.
FiTech EFI Basic Setup Instructions

This file contains the Timing Controller Setup and Initial Handheld Setup
QuickStartGuideFinalV5

How to Open a log in ProCal

SettingFuelPumpPulseWidthModulationFiTech

This file contains the wiring diagrams
30001.30002 Instructions.12.9.15








« Last Edit: March 18, 2019, 09:45:28 PM by Wheelman »