September 21, 2021, 01:34:01 AM

Author Topic: Thermal Fan Clutch Servicing  (Read 529 times)

0 Members and 1 Guest are viewing this topic.


  • Administrator
  • Sr. Member
  • *****
  • Posts: 269
  • My Ride: 1981 Trans Am
  • Location: Etobicoke
Thermal Fan Clutch Servicing
« on: October 26, 2020, 01:36:48 PM »
Thermal Clutch Servicing

One of the causes of overheating can be a faulty thermal clutch.

The thermal clutch operates by the metal coil expanding and contracting with the temperature and subsequently operating a valve in the center. The valve controls the flow of a thick viscosity fluid to engage the clutch more as the temperature rises. Often this valve will seize up.

To fix it, simply lubricate it with WD40 or oil, and use a thin flathead screwdriver to manually to turn it and work it loose again.

If you want the clutch to engage at a lower temperature, you can pull the coil's tab out of the slot and rotate it counterclockwise to the slot on the opposite side.
« Last Edit: January 18, 2021, 09:25:01 PM by Wheelman »