May 18, 2024, 07:04:27 PM
There aren't any users online.
|
Welcome to Toronto Trans AmsToronto Trans Ams is a forum based site dedicated to serving Pontiac Firebird and Trans Am enthusiasts in the Greater Toronto Area. All years and models of Firebirds are welcome here. You will find information on events, cruises, tech info and be able to communicate with local owners like yourself. Be sure to check out the TOTAS Weekly Cruise-ins Map for a cruise near you tonight! So move on to the Forum and find out what is happening with Firebirds in the Toronto area. Register your username, post photos of your ride(s) in the Gallery, upload a signature in the gallery, and get started today!. If your are experiencing problems with your account, contact the site admin Wheelman.
May 13, 2024, 08:23:34 PM by Wheelman
Views: 4 | Comments: 0 Here is an example if you have a question about the heat range on an NGK spark plug. The lower the #, the hotter the plug is. (Example- -6 is a hotter plug than -9) Spark plug gap for Points is .035 and any electronic or MSD is .040-.... April 30, 2024, 03:03:14 PM by Mike001 | Views: 14 | Comments: 2
Hi All hope someone out there can advise me on this one. I am almost ready to install my new timing chain set. just wondering do the dots on the crank and the cam both point to the 12 o'#039clock or does the cam point to 6 o'#039clock... April 17, 2024, 12:24:54 PM by Wheelman
Views: 12 | Comments: 0 1. Using a lift or jack stands raise car off the ground far enough to be able to slide transmission out from under the vehicle. 2. After the vehicle is raised, drain the transmission fluid into a drain pan by removing the pan bolts ... Pages: [1] 2
|
Sorry! There are no calendar events available at the moment.
Re: timing chain install for 301 Trans am, non turbo by Mike001
[May 17, 2024, 07:59:36 AM] NGK Spark Plug Ranges by Wheelman [May 13, 2024, 08:23:34 PM] Re: timing chain install for 301 Trans am, non turbo by Wheelman [May 12, 2024, 09:28:09 PM] timing chain install for 301 Trans am, non turbo by Mike001 [April 30, 2024, 03:03:14 PM] Torque Convertor Installation Guide by Wheelman [April 17, 2024, 12:24:54 PM]
|